CSD - Positions in Engineering

Positions in Engineering

Airport Engineer Location: Wausau, WI	Job Title: Airport Engineer Job Location: Wausau, WI Salary Range: 50 to 80K DOE Client company's airport section is growing and there is an exceptional opportunity for an experienced airport engineer to join and grow with the firm. This position will lead their airport engineering staff throughout Wisconsin for their airport clients. Responsibilities will include business development, management of airport design and construction services The successful candidate must possess a bachelor’s degree in civil engineering, and have at least ten years of experience with airport design and construction. The ideal candidate will have any/all of the following: project management experience, construction administration experience, business development experience, knowledge of CAD software, civil design software experience, and excellent communication skills. Must be Licensed P.E. in Wisconsin or have transferable PE.
Applications Engineer - Hydraulics/Cartridge Valve/Manifold #40838 Location: Des Moines, IA	Job Title: Applications Engineer–Hydraulics/Cartridge Valve/Manifold #40838 Location: Des Moines, IA Specialty: Engineering Description: This position is with a manufacturer of hydraulics components. The Applications Engineer will be responsible for providing cartridge valve circuit technical support; developing proposals for customer application needs; responding to inquiries for technical data and/or assistance; supporting service personnel and marketing personnel; teaming with Account Managers, Market Managers, and Business Unit Technical Support personnel to win new business and develop improvements to keep current business; defining and verifying improvements to current products that focus on customer needs; and assisting in defining new product requirements based on customer input. Experience: Required skills: 1-3 years experience in design of hydraulics systems and/or selection of components for hydraulic systems. Preferred skills: Cartridge valve and/or manifold systems design experience. Salary: $50-75K Education: BS – Mechanical Engineer, Ag Engineer or equivalent. Skills: Applications Engineer, hydraulics systems, hydraulic components, Cartridge valve, manifold systems, technical support Relocation: Yes
CAE Engineer Location: Bemidgi, MN	CAE Engineer Location: Bemidgi, MN Specialty: Engineer Description: This position is with a manufacturer of off-road vehicles and will be responsible for solving structural analysis problems; providing design insights and leadership; providing analysis support across multiple product groups using commercial FEA software codes; methods development and implementation of best practices; developing templates for use by design engineers; and leading other engineering design team members in the area of structures Experience: 3+ years experience; ANSYS and ProE experience; experience with advanced numerical problems, including structures, mechanical systems dynamics, optimization, contact, non linear, modal, systems approaches, durability; experience in the design of engines, automotive structures, or other dynamic mechanisms. Salary: $55-75K Education: BS Engineering degree is required – an advanced degree is preferred. Skills: CAE Engineer, ANSYS, ProE, advanced numerical problems, structures, mechanical systems dynamics, optimization, contact, non linear, modal, systems approaches, durability, design of engines, automotive structures, or other dynamic mechanisms. Relocation: Yes
Certified Vibration Analyst Location: Kalamazoo MI	CERTIFIED VIBRATION ANALYST Our client, a High tech service company looking for a Certified Vibration Analyst in Michigan area. Full benefits and 401 plan. Immediate openings. Successful candidate will need to have experience in ultrasonic leak detections, alignment, chatter, torque telemetry, Modal, ODS and/or FEA. Industries served include steel, paper, marine, power, pharmaceutical, food processing and the manufacturing industries.
Civil Engineering Positions Location: Traverse City, MI Position: Land (Site) planner Location: Traverse City, MI Position: Registered Land Surveyor Urgent!!	Multiple Civil Engineering Positions Position: Land (Site) planner - Site layout-development - landscape planner Location: Traverse City, MI Salary range: 35 to 55K DOE Description: Civil land planners with 5+ years experience needed for land development. Will need a creative flare, experience with site layout, cluster development, zoning experience, and ability to make presentations to clients and government officials. - Does not need to be a civil engineer but must be creative in site planning, know the zoning and smart growth principles. Position: Registered Land Surveyor - needs to have 1 + years experience after becoming registered. Strong desire to develop survey business without the ownership overhead burden. Someone in the growth and development mode with solid survey experience with be the successful candidate. Skills: AutoCAD 05, excellent communication skills, strong desire to get the projects done on time and within budget for fast track clients. Must be adaptable and flexible. Travel up to 20%. Benefits: Excellent benefits including medial, dental, 401K, flex time, cafeteria plan, and beautiful area to live and work.
Civil Engineers and Designers Florida and Michigan	Our client has an immediate need for qualified Civil Engineers and Landscape Architects – Florida Civil engineers needed immediately by our civil engineering clients in the Florida area. Candidates will need experience in planning subdivisions, resorts and urban areas. Experience with developing transportation plans, projects and evaluation of project plans. Also needed are Landscape Architects for Resort Planning and Development in the Florida area. Responsibilities include preparation of conceptual preliminary and contract documents including specifications. Involvement with construction aspects and coordination of staff in preparation of specs and plans BS in Civil Engineering or Architecture Experience 2+ years required Must be US citizen or permanent resident
Civil Project Engineer I & II Location: Lansing, MI	Civil Engineering-Project Engineer 1 and II Salary 22 to 29 per hour - $45K to 60K A. Essential Duties 1. Maintain Architectural / Engineering client contacts as assigned. 2. Conduct complex Architectural / Engineering work. 3. Manage A / E aspects of multiple and/or complex Architectural / Engineering projects as assigned. 4. Assign to, over see and review work of Project, Associate Architect / Engineer and Designers. 5. Direct Drafters and Designers for production as assigned. 6. Produce (draft) self work as assigned. 7. Establish and maintain schedules for project as assigned. 8. Establish and maintain budgets for project as assigned. 9. Apply knowledge of Codes. 10. Apply knowledge of project standards. 11. Utilize third party software. 12. Make major Architectural / Engineering decisions as assigned. 13. Review shop drawings, submittals, etc… as assigned. 14. Conduct new construction site visits. 15. Conduct specialty inspections. 16. Write reports, client letter, etc…. Qualifications EIT for Level I - Registered Professional Engineer status.- Level II Good relationships with assigned client base. Have knowledge of Code standards. Have knowledge of project standards. Have knowledge of third party Software. Benefits: dental, life, medical, optical, paid sick leave, paid vacation, 401K and STD, LTD.
Civil Engineers - Multiple Levels: 6 positions: Engineer I; Project Engineer; Sr. Project Engineer/Manager Location: Denver, CO *Urgent!!*	Job Title: Civil Engineer(s) 1 to 20 years experience Location: Denver CO Specialty: Engineering Company provides professional engineering, surveying, and construction services to both the private and public sector, specializing in site engineering for residential, commercial, industrial, and institutional types of projects. Company also has the experience and expertise to provide engineering services for municipalities, water and sanitation districts, special improvement districts, and drainage districts. All services supplied are tailored to the needs of the client. Experience: 6 positions for engineers: Engineer 1 - BSCE without PE and 1-5 yrs exp. to 50K; Project Engineer - BSCE - 5+ yrs. exp. to 70K: Sr. Project Engineer/Manager - BSCE - PE with 5+ yrs experience to 80k's Education: BS Civil Engineering; EIT or PE Skills: Subdivision, land development, water and sanitation systems
Civil Project Manager – Site Development Location: Indianapolis, IN	Position Description: A client focused position for someone who loves multi-tasking, communicating with fellow engineering & construction professionals, teamwork and group presentations. Position will work with and under the direction of the Civil Engineering Group Manager to manage and be accountable for a wide variety of projects in the areas of residential, industrial, commercial and municipal development. Education & Experience Requirements: Bachelor or Masters Degree in Civil Engineering, Public Administration and/or related experience. Professional Engineer (PE) license preferred. Must have ability to work well in a team environment and manage own projects with little oversight. Must have 4-7 years of increasing experience as a Project Engineer or Manager and understand the project management process. Relies on extensive experience and judgment to plan and accomplish goals. Must possess and maintain a valid driver’s license within acceptable criteria. Required Knowledge, Skills & Abilities: Knowledge of basic and complex civil engineering concepts. Knowledge of local zoning ordinances and general municipal procedures for site plan approvals. Knowledge of project management practices. Knowledge of Michigan Storm Water Management practices (certification preferred). Skill in analyzing information, good Judgement, excellent written and communication skills. Professional and customer focused. Ability to direct and follow-up with subordinates. Ability to research and understand various zoning and engineering requirements as dictated by municipal code.
Commodity Manager #40905 Locations: Des Moines IA *NEW!!*	Job Title: Commodity Manager #40905 Location: Des Moines, IA Specialty: Purchasing Description: This is an excellent opportunity with a central Iowa company! We are searching for a professional purchasing candidate who is aggressive and willing to challenge conventional thinking or processes. This person should have experience with total with commodity management, Supply Chain costs, Quality systems, Manufacturing processes, and Design considerations and have strong skills in the areas of Project Management, Negotiations, and Analytical Thinking. The main commodity will be steel, C-items (nuts, bolts, fasteners, etc.), turned parts, forgings, and gears and couplings. Experience: Required skills: 5 or more years experience in Commodity Management, Purchasing Management, Materials Management, Supply Chain Management, or Manufacturing Engineering; strong skills in negotiations, Project Management, PeopleSoft, presentations and analytical skills; and a technical background in Materials processing and selection. Applicants must be willing and able to travel approximately 50%, both Domestic and International. Desired skills: MBA; International business experience; Global commodity management; NAPM, CPM or ISM certifications; SOP’s, and experience with steel, C-items ((nuts, bolts, fasteners, etc.), turned parts, forgings, and gears and couplings. Salary: Up to $95K Education: Minimum: 4 year degree (Engineering, Supply chain, Industrial Technology, etc.) Skills: Commodity Manager, Purchasing Management, Materials Management, Supply Chain Management, Manufacturing Engineering, negotiations, Project Management, PeopleSoft, presentations, Materials processing, International business experience; Global commodity management; NAPM, CPM, ISM, SOP’s, steel, C-items ((nuts, bolts, fasteners, etc.), turned parts, forgings, gears, couplings Relocation: Yes
Construction – Inspection Positions (Civil Engineer) Locations: Fort Wayne and Hammond, IN	Construction Observer Manager – Fort Wayne - Experienced project engineer/ supervisor familiar with processes and procedures of INDOT highway and bridge construction along with the testing needed for projects. Will coordinate all aspects of documentation, field inspection, interpret specifications, working drawings and convey intent to the contractor, and will act as the liaison between project staff and field staff. Construction Observer – Hammond - Experienced inspector familiar with INDOT highway and bridge construction and the testing needed for projects. INDOT certified technician or graduate with Civil Engineering degree is preferred but not required. Will Coordinate all aspects of field inspection, interpret specifications, working drawings and convey intent to the contractor, and will act as the liaison between project staff and field staff Civil Engineer Positions – Indianapolis and South Bend, IN Civil Engineer I Highway– Indianapolis - Position requires BS in an engineering related field. EIT certification is desired. Recent PE applicants should also apply. Possess a strong knowledge of AutoCAD, MS Excel and Word. Will provide roadway and trail design, site design for transportation and building projects and traffic engineering functions. Work will include all facets of roadway and highway engineering design, including layout, safety, signage, pavement markings, storm and culvert design, sight distance, quantity computations and cost estimating for Federal Aid and Local projects Civil Engineer II – Highway – South Bend - Candidates must possess a strong knowledge of AutoCAD, MS Excel and Word. Experience with INDOT design and Eagle Point Software are a plus. Candidates must possess a BS in engineering related field. Professional engineers with 7 to 10 years experience are preferred. Will provide highway, roadway and transportation engineering design functions for very large Federal aid projects as well as local projects.
Controls Engineer Supervisor #40875 Location: Ames, IA	Job Title: Controls Engineer Supervisor #40875 Location: Ames, IA Specialty: Engineering Description: This position is with a manufacturing facility and will be responsible for supervising, coordinating and directing the daily activities of Controls Engineers. Some duties include: ensuring staff is adequately trained and that regulatory compliance is maintained; budgeting processes; programming and troubleshooting PLC’s; assuring the area activities are in compliance with SOP’s, cGMP’s, production schedules, safety requirements, and facility practices and policies; training and overseeing direct reports; performing validation activities; and other duties as required. Experience: 3 or more years experience in a manufacturing and controls engineering environment; supervisory and leadership experience; experience with SCADA, Allen Bradley PLCs, cGMP, Visual Basic and Intellution software; and experience with applicable regulatory compliance and validation activities. Salary: $65-75K Education: BSEE or Electronics discipline, or BSME with electrical/electronics experience. Skills: Controls Engineer Supervisor, manufacturing, SCADA, Allen Bradley PLCs, cGMP, Visual Basic, Intellution regulatory compliance, validation Relocation: Yes
Design Engineer #40804 Location: New Richmond, WI	Job Title: Design Engineer #40804 Location: New Richmond, WI Description: This is a great opportunity for a Design Engineer to be responsible for leading the design process from concept to production. Some duties will include: establishing a project development schedule from concept to production implementation; supporting all design related component styling, purchasing and manufacturing issues; determining nature and type of electronic models, detail drawings, and analysis; mentoring and supervising designers; participating in design reviews; analyzing field problems and recommending possible solutions; and preparing monthly project status reports. Experience: Required skills: 5+ years experience in design; Pro/Engineer experience; and any experience in the automotive, heavy equipment, power sports, or vehicle industry. Desired skills: Any experience with brakes, fuel systems, or powertrain integration into vehicles, chassis design or body components of a vehicle (mirrors, wheels, fuel tanks, seats, etc.) is a plus. Salary: $55-70K + bonus Education: BSME Skills: Design Engineer, Pro/Engineer, automotive, heavy equipment, power sports, vehicle, brakes, fuel systems, powertrain integration into vehicles, chassis design, body components of a vehicle, mirrors, wheels, fuel tanks, seats, Relocation: Yes
Design Engineer / Sr. Designer #40773 Location: Bemidji, MN	Design Engineer / Sr. Designer #40773 Location: Bemidji, MN Specialty: Engineering Description: This position is with a manufacturer of off-road vehicles and will be responsible for designing leading edge snowmobile concepts. Some duties include: conducting detailed design analysis; creating and updating production-ready Pro-E models and drawings; benchmarking competitive design, processes and materials; analyzing designs for cost reduction opportunities; and supporting fabrication and prototyping with detail specs as required. Experience: 3+ years of experience in design of off-road vehicles / power sports equipment; an avid snowmobile enthusiast would be a perfect fit; Pro-Engineer software expertise; MAPICS knowledge; experience with dynamic analysis tools; Bill of Material knowledge; and demonstrated experience at creative problem solving. Salary: $55-75K Education: 4 year degree in Mechanical Design/Drafting, BSME desired. Skills: Design Engineer, Pro-Engineer software, MAPICS, dynamic analysis tools, Bill of Material Relocation: Yes
Electrical Area Coordinator Location: Poughkeepsie - Fishkill, NY	Job Title: Electrical Controls Supervisor #40753 Location: Lexington, KY Job Location-NY Poughkeepsie Title- Electrical Area Coordinator Our client is looking for someone with electrical piping design experience for tool install packages in their Fishkill, NY office. What they need is a designer that could put the entire electrical package, including the LSS (life safety systems) portion, together without any outside help. This person will have to size conductors, conduit, breakers, verify that panels remained below their current ratings, identify LSS connection points and route connections to the tool. He/she would have to stand alone on the electrical design of the tool install. This person needs to be very hands on and must have a microelectronics/semiconductor facility background. Subfab-equipment that supports the clean room experience desired. Salary 100k plus Relocation: Yes
Electrical Design Engineer #40870 Location: Des Moines, IA	Job Title: Electrical Design Engineer #40870 Location: Des Moines, IA Specialty: Engineering Description: This position is with a manufacturing facility and will be responsible for the development of new designs as well as managing subcontracts for outside development. Duties include working with other engineers, scientists, and technicians to advance the state-of-the-art in magnetostrictive system designs, including applications in vibration/acoustics, machine tools, ultrasonics, and micro-positioning. Experience: Required skills: 3+ years of electrical engineering experience; solid engineering fundamental in the areas of nonlinear passive and active circuits, electromagnetics; a working knowledge of power amplifier designs, topographics and control theory. Desired skills: Any mechanical design experience, specification generation, program quotations, project management skills are desired. Any experience in smart materials industry would be ideal. Salary: $50-60K Education: BS Electrical Engineering, or Engineering degree with applicable experience. Skills: Electrical Design Engineer, electrical engineering, nonlinear passive and active circuits, electromagnetics, power amplifier designs, topographics, control theory, Mechanical design experience, specification generation, program quotations, project management, smart materials industry Relocation: Yes
Electrical Engineer - Manufacturing Equipment #40852 Location: Cedar Falls, IA	Job Title: Electrical Engineer – Manufacturing Equipment #40852 Location: Cedar Rapids, IA Specialty: Engineering Description: This position is with a manufacturer of metal components and will be responsible for electrical improvements of all equipment to ensure safety, quality and established production levels. Primary duties include: preparing modifications to original drawings and new designs, and evaluating effectiveness and accuracy; modifying PLC and HMI programs; troubleshooting electrical maintenance problems; identifying change opportunities and selecting new technologies; designing computer programs, utilizing network technologies; specifying critical electrical space parts; providing training on new systems; reading and interpreting electrical prints for problem diagnosis; troubleshooting drives, PLC’s, HMI’s and software; and project management. Experience: 3+ years of electrical engineering manufacturing experience; electrical control design; experience with PLC Ladder Logic, SCR drives, PLC’s, HMIs, DC motors, NEC; knowledge in high voltage equipment, machines diagnostics and controls; electrical control design; automatic gauge controls; cold rolling; metal stamping; general understanding of PCs; and related software experience including CAD. Salary: $46-66K Education: BSEE Skills: Electrical Engineer – Manufacturing Equipment, electrical control design, PLC Ladder Logic, SCR drives, PLC’s, HMIs, DC motors, NEC, high voltage equipment, machines diagnostics and controls, electrical control design, automatic gauge controls, cold rolling, metal stamping, CAD Relocation: Yes
Electrical Engineer with PE #40854 Location: Peoria, IL	Job Title: Electrical Engineer with PE #40854 Location: Peoria, IL Specialty: Engineering Description: We are looking for an Electrical Engineer with a PE license or the ability to register in the state of Illinois. This opportunity will be a Lead Electrical Engineer who will be doing HVAC and electrical design for Commercial and Industrial buildings such as schools, office buildings, hospitals, and libraries. Experience: Must have PE License or the ability to register in Illinois; 10+ years engineering experience with strong electrical engineering design; commercial and institutional buildings experience; and must have HVAC experience. Salary: $70-75K Education: BS Electrical Engineering Skills: Electrical Engineer, PE License, electrical engineering design, commercial and institutional buildings experience, HVAC Relocation: Yes
Electrical Maintenance Supervisor 2nd shift #40898 Location: Cedar Rapids IA *NEW!!*	Job Title: Electrical Maintenance Supervisor _ 2nd Shift #40898 Location: Cedar Rapids, IA Specialty: Manufacturing Description: This position will be responsible for coordinating the process of equipment maintenance while following established safety procedures. Some duties include: directing the preventative maintenance program; supervising workflow: including schedules, ordering of parts, paperwork, housekeeping and waste reduction; coordinating efforts between maintenance and production to minimize delays and downtime on machines; assisting in troubleshooting hydraulic, pneumatic and electrical systems and components; and maintaining departmental records. Experience: 3+ years industrial electrical experience; l knowledge of electrical, hydraulic and pneumatic systems, with a mechanical aptitude; leadership and supervisory skills with proven ability to motivate employees; a general understanding of PCs and related software experience; and must be able to work second shift. Salary: To $55K+ Education: Associate degree in Mechanical/Electrical Technology Skills: Electrical Maintenance Supervisor, industrial electrical, hydraulic, pneumatic systems, ability to motivate employees, PCs, software Relocation: Yes
Electronic Controls Technician #40832 Location: Waterloo, IA *NEW!!*	Job Title: Electronic Controls Technician – 1st Shift #40832 Location: Waterloo, IA Specialty: Manufacturing Description: The Electronic Controls Technician will be responsible for all factory electronics and equipment controls. This will include: lay-out, building, testing, troubleshooting, repairing and modifying developmental and production electronic components, machine controls, equipment and systems; training; processing work orders; testing faulty equipment; diagnosing the cause of malfunction; and working with equipment operators to ascertain problems with equipment before breakdown. Other responsibilities: computer networking, PLC programming, and various electronic testing (oscilloscope, signal generators, ammeters, voltmeters); and electronic schematics (reading, drawing or modifying). Experience: Required skills: One or more years experience in electronic maintenance and computer networking; industrial electronics background; demonstrated experience in: motor control systems, programmable controllers (PLCs) and industrial instrumentation with a strong preference for Siemans PLC and knowledge of the Allen Bradley highway; and the ability to work overtime as scheduled. Desired skills: Background in computer software development (programming); and/or industrial data communications experience (Allen Bradley Data Highway). Salary: To $50K+ with overtime Education: 2 year degree in electronics or equivalent experience. Skills: Electronic Controls Technician, electronic maintenance, computer networking, industrial electronics, motor control systems, programmable controllers (PLCs), industrial instrumentation, Siemans PLC, Allen Bradley, computer software development (programming), industrial data communications, Allen Bradley Data Highway) Relocation: No
Electronic Subsystem Designer for heavy equipment #40735 Location: Cedar Falls IA	Job Title: Electronic Subsystem Designer for Heavy Equipment #40735 Location: Cedar Falls, IA Specialty: Engineer Description: This position is with a manufacturer of vehicles and equipment used in construction and farming. The Electronic Subsystem Designer will be responsible for designing, developing, testing, and documenting major electrical, electromechanical, electro-hydraulic functions / subsystems for heavy equipment or agricultural equipment projects. Duties include: designing and specifications of electronic hardware interface, as well as application software; supporting development of functional specifications for subsystems; supporting control system design and analysis; translating functional specifications into software requirements; leading functional/subsystem design/test requirement reviews; supporting electronic hardware design group with requirements; and providing technical support during system field-testing activities. Experience: Required skills: 5+ years experience in subsystem design, software development and electronic circuit design and analysis; experience with C/C++ programming language and software development tools for embedded micro-controllers immobile applications; experience with electronic circuit test tools and simulation tools to assist in analysis and verification of functional / subsystem design; and the ability to work in a team environment. Desired skills: Experience with control systems design and analysis, agricultural / vehicle applications, and/or experience with ag or construction. Salary: $80-95K+ Education: BSEE, BSME, or BS Computer Engineering Skills: Electronic Subsystem Designer, software development, electronic circuit design and analysis, C/C++ programming, software development tools, embedded micro-controllers, electronic circuit test tools, simulation tools Relocation: Yes
Embedded Software Engineer #40846 Location: Fargo, ND	Job Title: Embedded Software Engineer #40846 Location: Fargo, ND Specialty: Automotive, Off-Road Equipment, Ag/Farm Equpiment Description: 3 or more years of experience in embedded Software Design using microcontrollers such as Siemens c16x, Motorola HC11, Power PC, etc. Must have experience using SW engineering processes such as project planning, documentation, testing and configuration management. Proficiency in C programming language, communication protocols such as CAN and understanding of real time OS (Nucleus, ThreadX, etc.) is also required. Experience in automotive/off road environments and/or hydraulic controls is a plus. Experience: Embedded Software Engineering experience. Salary: 65-100K Education: Minimum of a Bachelors degree in Electrical Engineering or related field. Skills: Relocation: Yes
Engineer (s) Location: Saginaw, MI	Our client is a full-service consulting civil engineering and surveying firm, a full-time positions in Civil Engineering; Finance manager; Civil Engineer - municipalities; project engineer - transportation; Project engineer - WSM; Design Engineer - WSM;
Engineering Applications Admin - unigraphnics IDEAS $40906 Location: Des Moines, IA *NEW!!*	Job Title: Engineering Applications Administrator _ Unigraphics / I-Deas #40906 Location: Des Moines, IA Specialty: Engineering Description: This manufacturing facility is looking for an Administrator for their CAD and other applications used within Engineering. This includes planning implementations and upgrades, coordination of licensing and maintenance activities, performing applications admin tasks, providing technical support, and coordinating these activities with other departments, including the IT Infrastructure group to make sure the IT application needs specific to Engineering are fulfilled. There will be some travel with this position, both regionally and occasionally globally. Experience: Required skills: Two or more years experience utilizing and administering I-Deas or Unigraphics applications, with experience in both applications preferred. Desired skills: Any experience in other Engineering applications such as Caliber RM, Dex Center, DM Link, and Product Lifecycle Management (especially SAP PLM). The candidate must be able to work effectively via teleconferences and web conferences to accomplish tasks; and must be able to travel (both regionally and occasionally globally). Salary: $50-60K Education: Bachelors in IT or Engineering is preferred, will also consider an Associates degree in CAD. Skills: Engineering Applications Administrator, I-Deas, Unigraphics, Caliber RM, Dex Center, DM Link, Product Lifecycle Management, SAP PLM Relocation: Yes
Environmental Compliance Specialist Location: Lansing, Michigan	Client company, a leading environmental, geotechnical and construction engineer firm for over 50 years, located in Lansing is seeking a: Environmental Compliance Specialist Location: Lansing, Michigan Candidate should have two to five years experience including permitting, Title V, AST/UST, RCRA, SARA, CERCLA, DOT, EPCRA, waste management (hazardous/universal), stormwater, SPCC and TSCA. Prefer that candidate work out of Detroit office; Lansing office possible.
Environmental Engineer (Scientist/Geologist) Locations: Grand Rapids, MI	Client company, located in Grand Rapids, is seeking an Environmental Engineer/Scientist/Geologist. This persons primary responsibility will be conducting Phase I and II Site Assessment work and report writing. Qualified candidates must have: a PE or PG with 3 plus years relevant experience or BS in Environmental Science or related field with 5 plus years relevant experience or BS any field with 10 plus years relevant experience. Good writing skills, proven ability to interface with clients and sub-contractors, reliability and organizational skills required. Full benefits, competitive salary and bonus are offered. Candidates with a 40 hour HAZMAT certification with a current 8 hour refresher are preferred.
Field Service Applications Engineer #40771 Location: Chicago, IL	Field Service Applications Engineer Location: Chicago, IL Specialty: Engineering Description: Although this position lists Chicago, IL, as the location, candidates can live anywhere in the Central USA. This position is with a manufacturer of high performance alloys for the connector industry. The Engineer will be responsible for providing technical support and direction to customers in the interconnection market; providing alloy and coating recommendations and application related issues; gathering competitor material and coating information for review by marketing management; entering and tracking sample and trial orders for customer solutions; providing seminars and technical review sessions with customers and potential customers; development calls to customers with associated travel; promotion of products at industry trade shows; working on support literature; working with Marketing to developing plans for increasing and tracking market share and developing support literature; and providing reports to Marketing Management. Experience: 5+ years experience in the connector or connector support industry; experience with high performance alloys (HPA) – 190-10, 192-10; the ability to understand and explain technical concepts; leadership, sales and negotiating skills; excellent communication, organizational and analytical skills; general understanding of PCs and related software; and the ability to travel up to 75%. Salary: $55-75K Education: Bachelor degree in a technical field - EE or ME preferred. Skills: Applications Engineer, Field Service Engineer, connector or connector support industry, high performance alloys (HPA) – 190-10, 192-10, sales, negotiating Relocation: Yes
Field Service Applications Engineer #40770 Location: Detroit, MI	Field Service Applications Engineer Location: Detroit, MI Specialty: Engineering Description: Although this position lists Detroit, MI, as the location, candidates can live anywhere in the Northeastern USA. This position is with a manufacturer of high performance alloys for the connector industry. The Engineer will be responsible for providing technical support and direction to customers in the interconnection market; providing alloy and coating recommendations and application related issues; gathering competitor material and coating information for review by marketing management; entering and tracking sample and trial orders for customer solutions; providing seminars and technical review sessions with customers and potential customers; development calls to customers with associated travel; promotion of products at industry trade shows; working on support literature; working with Marketing to developing plans for increasing and tracking market share and developing support literature; and providing reports to Marketing Management. Experience: 5+ years experience in the connector or connector support industry; experience with high performance alloys (HPA) – 190-10, 192-10; the ability to understand and explain technical concepts; leadership, sales and negotiating skills; excellent communication, organizational and analytical skills; general understanding of PCs and related software; and the ability to travel up to 75%. Salary: $55-75K Education: Bachelor degree in a technical field - EE or ME preferred. Skills: Applications Engineer, Field Service Engineer, connector or connector support industry, high performance alloys (HPA) – 190-10, 192-10, sales, negotiating Relocation: Yes
Finishing Engineer #40904 Location: Cedar Falls, IA	Job Title: Finish Engineer #40904 Location: Cedar Falls, IA Specialty: Engineering Description: This position is with a manufacturing facility and will be responsible for maximizing the efficiency of materials, determining methods, machines, and materials to support new product; developing action plans for new products and engineering changes; conducting tests and experiments to evaluate changes and opportunities; practicing and enforcing good 5S standards; managing capital projects; and managing equipment and material vendors from a technical standpoint. Experience: 3+ years experience in a finish/paint/coatings manufacturing environment; experience planning and designing finish and substrate preparation processes; improving finish processes; training plant personnel; project management experience; 5S; and the ability to communicate with all levels of personnel. Salary: $55-65K + bonus Education: BS Engineering preferred, or a Technical discipline. Skills: Finish Engineer, paint, coatings, substrate preparation processes, finish processes, project management, 5S Relocation: Yes
Finishing Supervisor - Coatings #40890 Location: Decatur, IL	Job Title: Finishing Supervisor _ Coatings #40890 Location: Decatur, IL Specialty: Manufacturing Description: The Finishing Supervisor / Coatings will be responsible for providing management and guidance to finishing department. Some duties include: providing leadership and continuous improvement to the Finish team; providing necessary resources, training, coaching, and mentoring; working with other team leaders and departments to make the facility process changes; and assuring that OSHA and other safety and environmental regulations are met. Experience: Three or more years experience in a manufacturing environment (finishing preferred); knowledge of solvent based finishes such as toners, stains, sealers and topcoats; knowledge of air assisted, airless and HVLP spray gun technology, UV flatline; a working knowledge of MRP, JIT and Kanban manufacturing systems, and TQM problem solving techniques. Salary: $60-65K + bonus Education: 2 or 4 year degree is required. Skills: Finishing Supervisor, Coatings, Finishing, solvent based finishes such as toners, stains, sealers and topcoats, air assisted, airless, HVLP spray gun, UV flatline, MRP, JIT, Kanban, TQM Relocation: Yes
Gear Products Design Engineer #40839 Location: Topeka, KS	Job Title: Gear Products Design Engineer #40839 Location: Topeka, KS Specialty: Engineering Description: This position is with a manufacturer of components for engines. The Gear Products Design Engineer will be responsible for engineering tasks; and assisting sales, marketing, service or drafting/design personnel in technical matters. Experience: Required skills: Two or more years industrial experience with a background in transmissions, pumps and/or motors. Desired skills: Experience with hydraulic components, simulation experience, CAD capabilities. Salary: $50-75K Education: BS Mechanical, Agricultural, or similar Engineering discipline. Skills: Gear Products Design Engineer, industrial, transmissions, pumps, motors, hydraulic components, simulation experience, CAD Relocation: Yes
Geotechnical Project Manager Location: Grand Rapids, MI	Our Client, a 35-year-old established and growing comprehensive Michigan firm specializing in materials engineering, geotechnical and environmental consulting and independent laboratory testing. Company is seeking qualified candidates (BSCE or MSCE) for a Geotechnical Project Engineer. Responsibilities: Includes all facets of geotechnical investigations and specialty ground improvement projects, developing a scope of project and nature of work, determining project budgets, cost planning, engineering analysis, preparing recommendations, writing reports, and preparing engineering documents. Salary: negotiable Requirements: The successful candidate will be a Professional Engineer, be self-motivated, detail-oriented with the flexibility to work in a team atmosphere. You should possess geotechnical engineering design skills and practical application of field engineering techniques, financial project management, and have proficient written and verbal skills. Experience in Michigan DOT standards would be ideal. Benefits: Excellent salary/benefits package including health/dental insurance, paid holidays, vacation days, sick/personal days, and participation in a company supported 401k
Group Engineering Manager #40848 Location: Chicago IL	Job Title: Group Engineering Manager #40848 Location: Chicago, IL Specialty: Manufacturing Description: This position is with a manufacturer of food products and will be responsible for managing all engineering and engineering related activities – driving for low cost highly efficient operations in union with Production Management and CI Teams. Some duties include: organizing and prioritizing engineering assignments; supervising administrative details; giving support and direction to engineering personnel; coordinating the use of corporate, plant and external resources; and communicating with technical management. Experience: 5+ years engineering experience; experience in confectionary/sweets; problem solving skills; must understand the cost drivers of manufacturing operations; must have excellent communication and organizational skills; and be proficient in MS Office products. Salary: $90-110K + 15% bonus Education: BS Engineering (ME, EE, Process Engineering, Chemical Engineering). Skills: Engineering Manager, confectionary, sweets, chocolate Relocation: Yes
Industrial Radiographer Technician/Level II NDT - 3rd Shift #40827 Location: Forest Lake, MN	Job Title: Industrial Radiographer Technician/Level II NDT_3rd Shift #40827 Location: Forest Lake, MN Specialty: Manufacturing Description: We are looking for a 3rd shift, union employee with a background in Level II NDT x-ray film developing and interpreting for the pressure vessel industry. This is an excellent opportunity in the Forest Lake, MN, area. Experience: 2+ years experience in developing and interpreting Level II NDT films for the pressure vessel industry; ISOTOPE certified. Salary: $18-20/hour Education: ISOTOPE cardholder/certification Skills: Industrial radiographer technician, Level II NDT, pressure vessel, ISOTOPE Relocation: Yes
Lead Process Designer #40887 Location: Green Bay, WI	Job Title: Lead Process Designer #40887 Location: Green Bay, WI Specialty: Manufacturing Description: This position is with an outstanding engineering and consulting firm working in the food, beverage and pulp/paper industries. The Lead Process Designer will be responsible for providing design solutions and working with other process staff; writing specifications; working with process control; verifying correctness of technical design, presentations, and completeness of project documents; reviewing technical staff design/calculation/drawings/details for accuracy and conformity with specifications, P&IDs, and vendor drawings; improving and altering designs with preventative maintenance and team concurrence; providing design input on equipment specifications; producing studies of process systems and providing overall direction for work; giving construction start-up and post-start-up support; and troubleshooting. Experience: 5+ years experience in industrial process design; Solidworks and Microstation experience; development of Process and Instrumentation drawings, development of Process Software Specifications; equipment sizing and specifications, Project Schedule Management.; Project Budget Management; equipment layouts and piping design; installation construction management, plant commissioning and start-up; and operator training experience. Salary: Up to $90K Education: Minimum: Associate’s degree in Mechanical Design or a related field. Skills: Lead Process Designer, industrial process design; Solidworks, Microstation, Process and Instrumentation drawings, Process Software Specifications; equipment sizing and specifications, Project Schedule Management, Project Budget Management; equipment layouts and piping design; installation construction management, plant commissioning and start-up; and operator training Relocation: Yes
Machine Center Supervisor #40883 Location: Abilene, TX	Job Title: Machine Center Supervisor #40883 Location: Abilene, TX Specialty: Manufacturing Description: The Machine Center Supervisor is responsible for the coordination of multiple high volume machining center operations and the direct supervision of personnel conducting operations within each workcell. Some duties include: supervising, planning, leading, and directing activities of up to 35 operators engaged in machining operations on brass alloy metal casting with high speed cutting tools to include: trepanning, drilling, tapping, reaming, seating, and threading; and leading the team in achieving company objectives through effective implementation of TQM systems and practices. Experience: Required skills: 3+ years experience operating, setting and running a variety of machines used in the fabrication of die-cast assembly parts within a manufacturing environment; and a minimum of two years experience in a supervisory or team lead capacity; experience training, teaching and supervising individuals to be machine and set-up operators. This position requires the skills and knowledge needed to oversee the operation, set-up and performance of PM checks and service on machines and manufacturing equipment utilized in an industrial manufacturing operation. Desired skills: A background in Lean Manufacturing, Six Sigma technology; knowledge of assembly fixtures, prove-out of processes, mechanics, electronics, hydraulics and tooling; CNC, PLC, rotary and linear transfer machining, screw machine operations and set-up, and be familiar with hand assembly as well as automation. Salary: $50-65K Education: Minimum: AAS, 4-year degree is preferred. Skills: Machine Center Supervisor, die-cast assembly parts, training, teaching and supervising individuals to be machine and set-up operators, PM checks and service on machines, Lean Manufacturing, Six Sigma, assembly fixtures, prove-out of processes, mechanics, electronics, hydraulics, tooling, CNC, PLC, rotary and linear transfer machining, screw machine operations and set-up, hand assembly Relocation: Yes
Maintenance Supervisor-Coatings #40889 Location: Los Angeles, CA	Job Title: Maintenance Supervisor #40889 Location: Los Angeles, CA Specialty: Manufacturing Description: This position is with a manufacturing facility and will be responsible for providing all maintenance support to the facility, local projects, CDM, CMMS and safety/environment functions. Some duties include: supporting the plant Preventive Maintenance activities through the use of a CMMS system; providing direct support to all required CDM activities; providing technical support and strategic direction for all site safety and environmental initiatives; managing all facility maintenance; tracking, managing and improving on energy usage; Fixed Asset control; and managing the plant waste reduction initiatives. Experience: Two or more years of manufacturing maintenance experience; technical troubleshooting skills; Capital Project budgetary tracking tools and financial systems knowledge; an understanding of plant processes; good Leadership and communication skills; competent in engineering skills, Gap Analysis Action Planning, CMMS – MP2, CDM + CI, and safety/environment. Salary: $60-65K Education: BA/BS preferred, but will consider any advanced education. Skills: Maintenance Supervisor, manufacturing maintenance, technical troubleshooting, Capital Project budgetary tracking tools, financial systems, plant processes, Gap Analysis Action Planning, CMMS – MP2, CDM + CI Relocation: Yes
Maintenance Supervisor- #40907 Location: Cedar Falls IA	Job Title: Maintenance Supervisor #40907 Location: Cedar Falls, IA Specialty: Maintenance Description: This manufacturing facility is looking for a first shift (with flexible hours) Maintenance Supervisor. Some duties include: managing the department administration; supervising production employees; managing and controlling department cost and efficiency; ensuring product quality, utilizing QOS and ISO/QS9000 systems; shop order release; administering contract workers; maintaining safety standards and training; managing material usage per shift; processing and forwarding all required paper work; maintain housekeeping and shop floor organization layouts; and monitoring all production processes and control charts. Experience: Required skills: Five or more years of manufacturing maintenance experience with progressive supervisory responsibilities; TS 16949, ISO/QS9000 experience. Desired skills: Experience with controls / electronics preferred; and Union and computer skills preferred. Salary: $45-55K Education: Minimum: HS diploma. Preferred: Two-year degree in management. Skills: Maintenance Supervisor, manufacturing maintenance, TS 16949, ISO/QS9000, controls, electronics, Union Relocation: Yes
Manufacturing Engineering Manager #40908 Location: Cedar Falls, IA *NEW!!*	Job Title: Manufacturing Engineering Manager #40908 Location: Cedar Falls, IA Specialty: Manufacturing Description: This Management position is with a manufacturing facility and will be responsible for insuring production equipment is properly maintained in order to minimize downtime and maximize production efficiency. Other duties include: assuring that proper design of new equipment and processes are effectively engineered; authorizing facility expenditure approval for all technical equipment and process improvements facility wide; ensuring that all regulatory requirements for contractor work standards are in compliance with government and EO requirements; ensuring that Proteus preventive and predictive maintenance programs are current; accountable for equipment spare parts inventory and availability; providing effective supplier contact and quoting for all facility process and equipment implementation and construction services; and providing technical support to all departments facility wide for Kaizen, TS/ISO, 5-S, Quality. Experience: Nine or more years experience; proven knowledge and understanding of process engineering; mechanical and electrical knowledge to understand the equipment performance capabilities as they pertain to the process expectations; capable of maximizing the equipment performance within the most efficient process flow arrangement in order to enable the most efficient and effective product yield; good verbal and written communication skills; the ability to perform basic math calculations and determine correct answers – from advance technology through engineering / design, to the contracting level of technical expertise, through to operations; customer service experience and skills; and working knowledge of and ability to apply the methods used in product quality control. Salary: Up to $85K Education: BS - Mechanical Engineering or Industrial Engineering preferred. Skills: Manufacturing Engineering Manager; process engineering; mechanical and electrical knowledge; equipment performance; process flow; basic math calculations; customer service; product quality control Relocation: Yes
Manufacturing Operations Manager #40884 Location: Abilene, TX	Job Title: Manufacturing Operations Manager #40884 Location: Abilene, TX Specialty: Manufacturing Description: The Operations Manager will direct and coordinate all activities concerning the production of company products, utilizing knowledge of product technology, production methods and procedures, the Process Excellence Tools of Lean and Six Sigma (DMAIC), and capabilities of manufacturing machines and equipment. Working within a Manufacturing/Assembly Business Units the Operations Manager will plan, develop and coordinate machining and/or assembly procedures and goals through the management of subordinate departmental personnel. Experience: 5+ years experience in a high-volume manufacturing environment with progressive managerial experience; Experience with manufacturing high volume, engineered products, including metalworking, machining, assembly, and testing. excellent organizational and managerial skills. Must have strong project management skills with leadership experience in a supervisory capacity. Experience in implementation of Lean Manufacturing, 5s, and Six Sigma techniques required, including cellarized work teams, Continuous Improvement, single piece flow systems, TQM, Kanban material flow, etc. Salary: $75-80K Education: BSME or MET, Industrial engineering, Manufacturing Engineering, Business Management or Operations Management. Skills: Manufacturing Operations Manager, high-volume manufacturing, manufacturing high volume, engineered products, including metalworking, machining, assembly, and testing; project management, Lean Manufacturing, 5s, Six Sigma, Continuous Improvement, single piece flow systems, TQM, Kanban material flow Relocation: Yes
Materials Manager #40864 Location: Decatur IL	Job Title: Materials Manager #40864 Location: Decatur, IL Specialty: Materials Description: Our client is looking for a Materials Manager to lead the internal Materials Management activities at their manufacturing facility. Responsibilities include: continuing to develop a highly effective materials organization; improving material flow within the facility; providing leadership for Warehousing and Receiving personnel; inventory record accuracy; and leading and managing annual inventory process and auditing plant scrap and yield analysis. Experience: 5+ years of materials management experience in a high volume manufacturing environment with MRP practices and progressive supplier relationships; 3+ years experience in a supervisory role; an in-depth knowledge of computerized integrated information systems (manufacturing, materials management, production planning, procurement and distribution; customer focus, developing Direct Reports; technical skills in: MRP, AS400, APICS trained / certified, PC skills, Financial analysis skills. Salary: $65-75K Education: BBA or BS Engineering; MBA is desirable. Skills: Materials Manager, materials management, MRP, supplier relationships, production planning, procurement and distribution, customer focus, developing Direct Reports, AS400, APICS trained / certified, PC skills, Financial analysis Relocation: Yes
Materials Manager #40900 Location: Cedar Rapids IA *NEW!!*	Job Title: Materials Manager #40900 Location: Cedar Rapids, IA Specialty: Manufacturing Description: This position is with a high-tech equipment manufacturer and will be responsible for the purchasing, inventory control and shipping functions and processes of the company. Some duties include: participating in the new product design and BOM processes; reading, understanding and communicating specs on manufactured parts; negotiating prices; assuring suppliers meet the MRP systems need dates; performing on-site visits to the Supply Chain for contract negotiation, establishing lead-times and quality issue resolutions; converting sales forecast into demand, inventory support and purchasing plans. Experience: Required skills: 5 or more years experience in purchasing, inventory and shipping management; proven knowledge of Manufacturing Requirements Planning (MRP) systems; the ability to drive change and continuous improvement; proven knowledge of Supply Chain Management and the ability to drive inventory, lead-time, price, and inbound freight cost reductions; and excellent communication and organizational skills. Desired skills: APICS certification or electronics background. Salary: $60-70K+ Education: Bachelors degree Skills: Materials Manager, purchasing, inventory, shipping, Manufacturing Requirements Planning (MRP) systems, continuous improvement, Supply Chain Management, drive inventory, lead-time, price, and inbound freight cost reductions, APICS certification, electronics background Relocation: Yes
Manufacturing Engineer #40775 Location: New Richmond, WI	Manufacturing Engineer Location: New Richmond, WI Specialty: Manufacturing Description: This position is with a manufacturing facility and will be responsible for establishing and implementing the most cost efficient methods for production. Some duties include: conducting direct labor studies; coordinating with production to identify areas of unnecessary cost and researching methods and procedures for cost reductions; analyzing and evaluating manufacturing methods and standards problems; assisting in the review of preliminary designs; assisting in the improvement of tool and fixture design; coordinating detailed, complete, and accurate departmental layout and capital equipment studies; assisting in preparation of departmental budgets; and purchase requisitions and records. Experience: Required skills: 3+ years experience working in an assembly facility with automation experience; Lean Manufacturing knowledge/experience; metal working, stamping and welding of small gauge metals; and heavy metal fabrication and welding experience. Desired skills: Experience in the automotive industry or engines is a plus. Salary: $50-65K + 15% profit sharing bonus Education: BS in Manufacturing, Industrial or Mechanical Engineering. Skills: Manufacturing Engineer, assembly, automation, Lean Manufacturing, metal working, stamping, welding of small gauge metals, heavy metal fabrication, welding, automotive industry, engines Relocation: Yes
Manufacturing Quality Engineer #40768 Location: Cedar Rapids, IA	Job Title: Manufacturing Quality Engineer #40768 Location: Cedar Rapids, IA Specialty: Manufacturing Description: This position is with a manufacturer of metal components and will be responsible for developing manufacturing process systems and controls and providing technical support. Some duties include: quality issues pertaining to mechanical properties and material process flow; establishing standard work practices, procedures and methods to reduce process variation; implementing changes in work practices, procedures and methods that would result in permanent, overall and continuous improvement in productivity, quality and cost; performing equipment utilization and capability studies; diagnosing and solving manufacturing process problems; conducting testing through evaluation of production trial runs; and providing training on fundamentals of SPC for production personnel. Experience: 2+ years manufacturing quality experience; process quality experience; experience with: casting and rolling process, process improvement, control plans, flow charts, process quality; ERP; Root Cause Analysis; customer service; and hands-on plant experience. Must also have: leadership skills, good communication, organizational and analytical skills, strategic business orientation with strong customer focus, current knowledge of trends and systems in Manufacturing Process Engineering, familiarity with statistical/analytical methods for problem solving; and understand of process flow of an order from receipt of inquiry to shipment. Salary: $41-63K Education: BS Engineering – Materials Science or Metallurgy Engineering preferred. Skills: Manufacturing Quality Engineer, process quality experience; experience, casting and rolling process, process improvement, control plans, flow charts, process quality; ERP; Root Cause Analysis; Relocation: Yes Relocation Detail: Date Posted: 04/28/2005
Mechanical Design Engineer #40871 Location: Des Moines, IA	Job Title: Mechanical Design Engineer #40871 Location: Des Moines, IA Specialty: Engineering Description: This position is with a manufacturing facility and will be responsible for working with the team to create magnetostrictive/system designs, including applications in vibration/acoustics, machine tools, ultrasonics, and micro-positioning. Experience: Required skills: 3+ years of mechanical engineering experience; solid engineering fundamentals in the areas of electromagnetism, vibration/acoustics, strength of materials, heat transfer, structural dynamics, and analysis and modeling techniques. Desired skills: Experience with Femlab, ANYSS, Matlab, and SolidWorks; any Electrical design experience; specification generation, program quotations, project management skills are desired. Any experience in smart materials industry would be ideal. Salary: $50-60K Education: BS Mechanical Engineering, or Engineering degree with applicable experience. Skills: Mechanical Design Engineer, electromagnetism, vibration/acoustics, strength of materials, heat transfer, structural dynamics, and analysis and modeling techniques, Femlab, ANSYS, Matlab, SolidWorks; Electrical design, specification generation, program quotations, project management, smart materials industry Relocation: Yes
Mechanical Engineer with PE #40855 Location: Peoria, IL	Job Title: Mechanical Engineer with PE #40855 Location: Peoria, IL Specialty: Engineering Description: We are looking for a Mechanical Engineer with a PE license or the ability to register in the state of Illinois. This opportunity will be a Lead Mechanical Engineer who will be doing HVAC and mechanical design for Commercial and Industrial buildings such as schools, office buildings, hospitals, and libraries Experience: Must have PE License or the ability to register in Illinois; 10+ years engineering experience with strong mechanical engineering design; commercial and institutional buildings experience; and must have HVAC experience. Salary: $70-75K Education: BS Mechanical Engineering Skills: Mechanical Engineer, PE License, mechanical engineering design, commercial and institutional buildings experience, HVAC Relocation: Yes
Paint Manufacturing Engineer #40778 Location: Northern MN	Job Title: Paint Manufacturing Engineer #40778 Location: Northern Minnesota Description: This position is with a manufacturer of off-road vehicles and will be responsible for the Liquid and Powder Coat paint systems. Duties include: planning and coordinating the activities necessary to produce painted products within safety, quality and cost standards; ensuring paint schedule compliance; developing and updating process documentation and procedure instruction; conducting direct labor studies; defining tooling and fixturing used in the paint process; analyzing and evaluating manufacturing/paint methods and standards; reviewing preliminary designs; and reviewing and evaluating cost pertaining to make vs. buy decisions and new product development. Experience: 3+ years of experience with Paint Systems or Paint Engineering; proven Liquid and Powder Coat Paint Applications and Systems experience; strong project management and leadership skills; and strong organizational, communication and PC skills. Salary: $70-80K Education: BS Engineering (Mechanical, Industrial, Chemical) Skills: Paint Manufacturing Engineer, Paint Systems or Paint Engineering, Liquid and Powder Coat Paint Applications and Systems Relocation: Yes
Powertrain Design Engineer #40805 Location: New Richmond, WI	Job Title: Powertrain Design Engineer #40805 Location: New Richmond, WI Specialty: Engineering Description: This is a great opportunity for a Design Engineer to be responsible for design activities of new drivetrains from concept to production. Some other duties include: designing CVTs, transmission systems and components; designing and applying driveline systems including belts, clutches, splines, gears and CVTs; material selection, material properties; creating component and system level specifications; supporting all design related component styling, purchasing, servicing and manufacturing issues; preparing and presentation of design reviews; modeling and drafting activities using Pro/Engineer software; and applying Design for Manufacturing and Failure modes and Effects techniques. Experience: 6+ years powertrain design experience; and Pro/Engineer experience. Salary: $55-75K + bonus Education: BSME Skills: Powertrain Design Engineer, CVTs, transmission systems and components, driveline systems, belts, clutches, splines, gears, material selection, material properties, creating component and system level specifications, component styling, purchasing, servicing, preparing and presentation of design reviews; modeling and drafting, FMEA Relocation: Yes
Printed Circuit Board Designer #40842 Location: Eastern Iowa	Job Title: Printed Circuit Board Designer #40842 Location: Eastern Iowa, IA Specialty: Communications/Electronic Equipment Description: The PCB Designer is responsible for converting Printed Circuit Card design schematics into a circuit card layout using the latest design tools (SW) available. The individual receives guidance and technical input from the lead electrical engineer. The Designer also assists with design and production readiness reviews. Experience: 5 years or more of current design experience. Salary: 45-60K Education: Bachelors degree in Electrical or Computer Engineering Skills: Printed Circuit Board Design experience Relocation: Yes Relocation Detail: Full Relocation
Product/Design Engineer #40840 Location: Des Moines, IA	Job Title: Product / Design Engineer #40840 Location: Des Moines, IA Specialty: Engineering Description: This position is with a manufacturer of components for engines. The Product Design Engineer will be responsible for working effectively with the manufacturing team to solve quality and production related issues using 8D problem solving and other statistical tools and assisting sales, marketing, service or drafting/design personnel in technical matters. Experience: Required skills: One or more years experience in product development or manufacturing; good oral and written communication skills; good teamwork skills including working with a global team; and the ability to travel approximately 10% both international and domestic. Desired skills: A background in transmissions, pumps and/or motors. Salary: $50-75K Education: BS Mechanical, Agricultural, or similar Engineering discipline. Skills: Product / Design Engineer, product development, manufacturing, travel, transmissions, pumps, motors Relocation: Yes
Product Design Engineer - Pro-E Location: Grand Rapids, MI	Product Design Engineer Located in Grand Rapids Immediate opening for a self motivated professional on our new products development team. The successful candidate must possess a minimum of 3 years Pro-Engineer design software experience in addition to 7 years of product development. Other skills include strong project management with the ability to take the project from beginning to end, supplier selection knowledge, and experience ensuring design intent, manufacturing and quality of the product. BSME degree preferred.
Production Supervisor – #40886 Location: Los Angeles, CA	Job Title: Production Supervisor #40886 Location: Los Angeles, CA Specialty: Manufacturing Description: We are seeking local or regional candidates to the Los Angeles area to work for this manufacturing facility. The position of Production Supervisor will be responsible for coaching, mentoring and developing team members; planning and managing the day to day allocation of resources (equipment, people, materials and systems); reviewing daily achievement of targets and report variances; scheduling and ensuring that maintenance and repairs are completed; and reviewing daily maintenance effectiveness with the Maintenance Mechanic. Experience: Two or more years of successful leadership experience in a manufacturing facility; production supervision experience could come from any industry such as food, beverage, automotive supplier, consumer goods, or control system components, etc. The ideal candidate will have a work history that has demonstrated increased responsibilities over time – reflected in new work assignments, career advancements, and a larger scope of work; a strong sense of integrity; and the ability to deal well with ambiguity (can assess and take charge of a situation without always being told what to do.) Must be willing to work in 24-7 environment, with rotating responsibilities on 2nd/3rd shift. Minimal relocation assistance may be available; local or regional candidates are preferred. Salary: 55-65K + bonus Education: Minimum required: Bachelor degree. Skills: Production Supervisor, food, beverage, automotive supplier, consumer goods, or control system components, leadership, Relocation: No Relocation Detail: Minimal relocation assistance may be available; local or regional candidates are preferred.
Production Supervisor – 2nd Shift #40733 Location: Lexington, KY	Specialty: Manufacturing Description: This position is responsible for supervising production team members in a Lean Manufacturing environment. This Lead position will ensure that the production team meets their Safety, Quality, Delivery and Cost objective while maintaining high morale in their production area. The position is also responsible for training, conducting performance appraisals and providing ongoing coaching and feedback to supervised team members. Experience: Must have 2+ years of hands-on experience supervising others in a fabrication, welding, or assembly environment; Lean Manufacturing experience; the ability to apply Lean techniques including JIT and Continuous Improvement; related technical ability and good understanding of production processes and equipment; demonstrated ability to motivate and train others; excellent problem solving skills; and excellent oral and written communication skills. Salary: $40-55 Education: Skills: Production Supervisor, Production Leader, Lean Manufacturing, JIT, Continuous Improvement Relocation: Yes
Production Supervisor (s)– 2nd Shift - #40782 Location: Des Moines, IA	Job Title: Production Supervisor(s) - 2nd Shift #40782 Location: Des Moines, IA Specialty: Manufacturing Description: These 2nd shift openings are with a manufacturing facility and will be responsible for the production schedule; supervising and communicating with the production work groups; and coordinating with other departments to achieve results in terms of cost, quality and schedule. Experience: Required skills: 3+ years supervisory experience in a manufacturing environment; must be able to work 2nd shift; have experience with Lean Manufacturing and Kaizen; knowledge of safety and OSHA regulations. Must be team oriented with strong leadership and communication skills. Preferred skills: Union experience is a plus. Salary: $40-51K + bonus Education: 4 year degree Skills: Production Supervisor, Team Leader, Lean Manufacturing, Kaizen, safety, OSHA, Union Relocation: Yes
Production Supervisor (s)– Bilingual (English/Spanish) - #40817 Location: Las Vegas, NV	Job Title: Production Supervisor(s) - Bilingual (English / Spanish) Location: Las Vegas, NV Specialty: Manufacturing Description: These positions are with a non-union manufacturing facility. The Production Supervisors must be bilingual (English / Spanish) with at least one year of supervisory experience. Responsibilities include: providing management and guidance to department personnel and ensuring the timely completion of work within the company’s safety, quality and productivity guidelines; coaching and mentoring associates on behavior relevant to the company’s values, policies, procedures and performance standards; and assuring that OSHA and other safety and environmental regulations are met. Experience: One or more years manufacturing supervisory experience; strong communication skills - must be bilingual (English / Spanish); strong analytical, problem solving, delegation and conflict resolution skills; exceptional leadership, interpersonal and organizational skills; expert knowledge of assembly and manufacturing procedures; knowledge of equipment and machinery; and must be adaptable to change and have the ability and desire to make a difference. Salary: $40-55K + bonus Education: Post secondary education is not required. Skills: Production Supervisor, Bilingual - English / Spanish, manufacturing supervisor, analytical, problem solving, delegation, conflict resolution skills, leadership, assembly and manufacturing procedures Relocation: Yes
Project Architect I Location: Lansing, MI	Our client is aa full-service consulting civil engineering and surveying firm, a full-time Project Engineer position for its St. Johns office. Candidates should be qualified in the study, design, construction, and administration of watershed management projects including storm sewer design, hydrologic and hydraulic modeling, dams, open drains, storm water detention basins, lake level studies, NPDES permitting, and site plan reviews, etc. Two to six years of related experience should include but not be limited to: Ø hydrology and hydraulics for watershed management projects Ø technical writing and communication skills Ø comprehensive computer background including modeling experience Applicants must have a Civil Engineering or Biosystems Engineering degree from an accredited institution and must have passed the F.E. test (formerly E.I.T.). Preference will be given to those candidates who have achieved Professional Engineering status. The successful candidate will be performing periodic field visits to project sites and will be handling tasks and equipment associated with those sites. Applicant will be working as a team member with specific assignments including utilization of computers, design standards and manuals, verbal and written presentation to clients, supervisors and the public. Familiarity with AutoCAD, GIS and Hydrologic and Hydraulic Modeling is a plus.
Project Controls Engineers & Designers- #40819 Location: Green Bay WI	Job Title: Project Controls Engineer(s) & Designer(s) #40819 Location: Green Bay, WI Specialty: Engineering Description: We are seeking to fill engineering positions for Project Controls Engineers, Lead Process Designer, Project Mechanical Engineer with Machine Design Focus, or Project Manager/Lead Engineers. The company is an outstanding engineering, scientific and consulting firm for systems integration projects. Most positions have some travel required (approximately 20-35%). Responsibilities may include: hardware and software design for product conveying systems integrations projects; designing and programming of PLC, OMI, VFD, servo and motion controls; developing a 3D design and creating detailed specification packages; conceptual design of custom machinery; or managing multi-disciplined projects. Experience: Required skills: 5+ years of experience with systems integration; experience with programming PLC, OMI, VFD, servo and motion controls; Allen-Bradley experience; custom machinery design; AutoCad experience; and/or project management experience. Must be able to travel approximately 20-35%. Desired skills: Experience with any of these is a plus: Modicon, 3D package, food or beverage industry, OEM, HVAC, utilities, piping, bulk material handling, field investigations, client review, installation and start-up support. PE certification, project manager or lead technical engineer, or Project Management Professional (PMP) certification, Salary: $70-85K Education: These positions require a minimum of an Associates degree in Mechanical Design for the Designer position; and a minimum of a BS Mechanical Engineering, BS Electrical Engineering, or Bachelor’s degree in an Engineering discipline for the other positions. Skills: Controls Engineer, Process Designer, Project Manager, systems integration, PLC, OMI, VFD, servo and motion controls, Allen-Bradley, custom machinery design, AutoCad, Modicon, 3D, food or beverage industry, OEM, HVAC, utilities, piping, bulk material handling, field investigations, client review, installation, PE, PMP Relocation: Yes
Project Engineer - Program Manager #072705 Location: Grand Rapids, MI URGENT!!	Job Title: Project Engineer/Program Manager Location: Northeast Grand Rapids MI Permanent Hire position with Client Company; excellent benefits. Client has an immediate need an individual to coordinate company mechanical projects. Successful candidate will be a motivated, self-starter joining their Engineering team. Job requirements include project leadership, planning, directing and coordinating engineering projects to ensure that goals and/or objectives are accomplished within prescribed parameters. Will be responsible for purchase of production equipment, injection molds, project budges and coordination of production teams and external resources. Requirements: Bachelors degree, preferably in mechanical engineering Two years experience in project management; knowledge of Mechanical cable and plastics parts design. Good communication and interpersonal skills required. Experience in automotive manufacturing parts supplier industry preferred,
Project Engineer - Pro E or CAD #40698 Location: Northern Minnesota	Job Title: Project Engineer – ProE or CAD #40698 Location: Northern Minnesota, MN Specialty: Engineering Description: This position is with a manufacturer of sports vehicles. The Project Engineer will be responsible for designing leading edge vehicle products using Pro-E or CAD; utilizing the company’s product development process; planning and supervising technical assignments, reviewing progress, and evaluating results; coordinating testing to confirm design function; establishing projected part and tool costs; participating in design reviews; analyzing field problems and recommending possible solutions. Experience: Required skills: 3 or more years previous experience in consumer products or accessory design; CAD or Pro-E experience; knowledge of principles, practices and procedures to the completion of difficult technical problems and projects; and creative and innovative; quality and customer focused. Desirable skills: Any experience with ADAMS, suspensions, powertrain / engine, or vehicles is a plus. Salary: $55-75K + bonus Education: BSME Skills: Project Engineer, CAD, Pro-E, ADAMS, suspensions, powertrain, engine, vehicles Relocation: Yes
Project Engineer Location: St. Johns, MI	Our client is a full-service consulting civil engineering and surveying firm, a full-time Project Engineer position for its St. Johns office. Candidates should be qualified in the study, design, construction, and administration of watershed management projects including storm sewer design, hydrologic and hydraulic modeling, dams, open drains, storm water detention basins, lake level studies, NPDES permitting, and site plan reviews, etc. Two to six years of related experience should include but not be limited to: Ø hydrology and hydraulics for watershed management projects Ø technical writing and communication skills Ø comprehensive computer background including modeling experience Applicants must have a Civil Engineering or Biosystems Engineering degree from an accredited institution and must have passed the F.E. test (formerly E.I.T.). Preference will be given to those candidates who have achieved Professional Engineering status. The successful candidate will be performing periodic field visits to project sites and will be handling tasks and equipment associated with those sites. Applicant will be working as a team member with specific assignments including utilization of computers, design standards and manuals, verbal and written presentation to clients, supervisors and the public. Familiarity with AutoCAD, GIS and Hydrologic and Hydraulic Modeling is a plus.
Project Manager - Construction #40865 Location: Waterloo, IA	Job Title: Project Manager #40865 Location: Waterloo, IA Specialty: Management Description: We are looking for a Project Manager who will be involved in planning, design, and construction projects for commercial buildings in the Midwest / Upper Midwest. Project Managers should have a good track record using CAD and be able to handle working on 3-5 projects at one time. Experience: 8+ years experience in Project Management and CAD for commercial building construction (from design to build stages); must be familiar with Midwest and Upper Midwest construction (materials usage, building requirements, types of buildings); great organizational skills; and the ability to work in a fast-paced environment. Salary: $50-60K Education: Bachelors degree – Construction Management preferred. Skills: Project Manager, CAD, commercial building construction Relocation: Yes
QA Manager #40851 Location: Cedar Falls, IA Immediate Need; interviewing ASAP	Job Title: QA Manager – Immediate need, Interviewing ASAP!! #40851 Location: Cedar Falls, IA Specialty: Quality Description: This position is with an automotive related manufacturing facility and will be responsible for continual implementation and maintenance of the Quality Management Systems. Duties include: formulating and maintaining quality control objectives; communicating the quality assurance philosophy to key personnel; handling all customer quality related issues; applying total quality management tools and approaches to analytical and reporting processes; developing, monitoring and analyzing process controls and statistical data; directing inspection and testing workers; strengthening measurement systems; designing quality control training programs; and working with vendors. Experience: Education: BS degree in Engineering or related fields. Required skills: 5+ years progressive experience in automotive related Quality Management; must have experience with ISO/TS 16949 and a strong working knowledge of QS 9000, ISO 14001 and other Automotive Quality Standards; a working knowledge of AIAG systems such as advanced Product Quality Planning and Control Plan, measurement systems, SPC, Production Part Approval Process; automotive recognized Problem Solving Methodology; excellent written and verbal communication skills; effective organization development and change management skills; and the ability to train and develop, lead, motivate and manage personnel. Salary: $70-80K Education: BS degree in Engineering or related fields. Skills: QA Manager, Quality Assurance Manager, automotive, Quality Management, ISO/TS 16949, QS 9000, ISO 14001, Automotive Quality Standards, AIAG systems, measurement systems, SPC, Production Part Approval Process, automotive recognized Problem Solving Methodology Relocation: Yes
Quality Engineer - NW Iowa #40868 Location: Sioux City, IA	JJob Title: Quality Engineer – NW Iowa #40868 Location: Sioux City, IA Specialty: Engineering Description: We are looking for a Quality Engineer with a four year degree in Engineering and a minimum of 3-5 years manufacturing experience with ISO and TS 16949 to work for this privately owned company and supplier to OEM's (in a variety of industries). This Quality Engineering professional will be responsible for maintaining the quality program and quality registration/certification; and assist with development and monitoring purchasing supplier certification and supplier certification processes. Experience: 3+ years of Quality Engineering in a manufacturing environment; the ability to create documentation and processes that are consistent with ISO and TS 16949; experience in areas of compliance and conformance to all customers (OEM) quality programs and processes; and experience developing and monitoring purchasing supplier certification and supplier certification processes. Salary: $45-58K Education: BS in an Engineering discipline. Skills: Quality Engineer, ISO, TS 16949, developing and monitoring purchasing supplier certification and supplier certification processes Relocation: Yes
RCI/Lean Engineer #40841 Location: Des Moines, IA	Job Title: RCI / Lean Engineer #40841 Location: Des Moines, IA Specialty: Engineering Description: This position is with a durable goods manufacturer and will be responsible for designing new innovative Lean Production Processes. Some duties include: providing guidance to all employees regarding factory arrangement projects; providing specific data and plans for factory changes through one on one and group update meetings; follow-up on improvement activities to ensure adherence to changes; creating and maintaining project budgets and schedules; and assisting in the acquisition of equipment and development of improvement strategies. Experience: Required skills: One or more years experience in durable goods manufacturing; experience designing Lean Production Processes; experience laying out product lines, work cells, and work stations; strong project management skills; the ability to drive changes through the system (a change agent); and experience with Lean and Kaizen events. Desired skills: CAD software skills. Salary: $55-60K + bonus Education: Bachelor’s degree – Engineering preferred Skills: RCI / Lean Engineer, durable goods manufacturing, Lean Production Processes, laying out product lines, work cells, and work stations, strong project management skills, change agent, Lean, Kaizen, CAD Relocation: Yes
Safety Coordinator #40881 Locations: E. Brunswick, NJ	Job Title: Safety Coordinator #40881 Location: E. Brunswick, NJ Specialty: Manufacturing Description: This position is with a manufacturer and will be responsible for leading efforts and teams relating to a safe workplace and safe workers. Some duties include: developing, promoting and implementing all safety policies, training and programs; fully complying with both regulatory and plant safety programs; driving incident and injury investigations in a timely and well documented fashion; maintaining accident and training records; input and support for capital projects; and managing third party safety consultants. Experience: 3+ years factory floor Safety experience in a union setting; Loss Control, Risk Management, Environmental, Occupational Health experience; a working knowledge in OSHA regulations; the ability to conduct incident investigations including root cause and data analysis; the initiative to lead continuous improvement efforts; behavioral based Training and Development; skills in conflict resolution and technical writing; and public speaking/presentation experience. Salary: $53-66K Education: BA/BS Skills: Safety Coordinator, factory floor Safety, union, Loss Control, Risk Management, Environmental, Occupational Health, OSHA, incident investigations, root cause, data analysis, lead continuous improvement, bavioral based Training and Development, conflict resolution Relocation: Yes
Safety Manager #40864A Locations: Waterloo, IA Immediate Need - Hot Job!!!	Job Title: Safety Manager –Interviews ASAP!! HOT JOB! Location: Waterloo, IA Specialty: Safety Description: This position is with a manufacturing facility and will be responsible for working closely with all departments to develop and maintain health and safety programs. Duties include: recommending measures to reduce or eliminate industrial accidents and health hazards; ensuring compliance with Federal and State OSHA; conducting and monitoring accident reporting, investigations, and corrective actions; conducting regulatory safety training requirements; organizing and participating in all safety team meetings; incorporating ergonomics in the workforce; inspecting new equipment for operation and safety; analyzing and updating policies and procedures for safety; and preparing written monthly reports and safety objectives to corporate.. Experience: Required skills: 3+ years of safety related experience in developing and implementing safety programs and procedures; Federal and State OSHA compliance experience; excellent verbal and written communication skills; and computer ability with Excel, Word and PowerPoint. Desired skills: CSP certification, OSHA 501 course. Salary: $50-60K Education: BS Industrial Safety, Safety Engineering, or a closely related field. Skills: Safety Manager, safety programs, OSHA compliance, CSP certification, OSHA 501 Relocation: Yes